How to Apply Greenhouse Shade Paint and Netting for Summer

Managing extreme greenhouse temperatures during midsummer is crucial for plant health, and applying shade paint or shade netting to the roof are the two most effective ways to prevent overheating. This article provides a straightforward guide on how to prepare your greenhouse and properly apply both liquid shade paint and woven shade cloth to protect your summer crops from scorching heat and excessive UV radiation.

Applying Greenhouse Shade Paint

Shade paint, also known as whitewash, is a chalk-based liquid applied directly to the exterior of the greenhouse glass or polycarbonate panels. It reflects sunlight and gradually wears off as the weather cools in the autumn.

1. Clean the Roof Surface Before applying paint, wash the exterior of the greenhouse roof with mild soapy water and a soft brush. Remove all dirt, moss, and algae, then allow the panels to dry completely. Paint will not adhere properly to a dirty or wet surface.

2. Mix the Shade Paint Follow the manufacturer's instructions to dilute the concentrated shade paint with water. Stir the mixture thoroughly until it reaches a consistent, milky texture. A standard ratio is typically one part paint to four parts water, though you can use less water for a thicker, more opaque barrier.

3. Apply on a Dry, Overcast Day Choose a dry day with mild temperatures so the paint does not bake onto the glass before you can spread it evenly. Use a long-handled paint roller for flat, even coverage, or a garden pressure sprayer for a faster application. Apply the paint to the outside of the roof panels, focusing primarily on the south and west-facing sides where the sun is most intense.

4. Removal in the Fall While rain naturally washes away most shade paint by the end of the season, any remaining residue can be easily wiped off in the autumn using a dry brisk brush or a hose and a sponge.

Installing Greenhouse Shade Netting

Shade netting, or shade cloth, is a knitted polyethylene fabric that blocks a specific percentage of sunlight. It can be installed on the inside or outside of the greenhouse roof and reused for many years.

1. Select the Right Density For midsummer vegetable and flower gardening, choose a shade cloth with a density between 30% and 50%. This range blocks enough heat to keep the greenhouse cool while still allowing sufficient light for photosynthesis.

2. Exterior Application (Most Effective) Installing netting on the outside of the roof stops heat before it enters the structure.

  • Drape the netting over the roof ridge of the greenhouse.
  • Pull the fabric taut so it does not flap in the wind, which can damage both the netting and the panels.
  • Secure the edges using grommets (eyelets) and bungee cords tied to the base of the greenhouse frame, or use specialized shade cloth clips that snap into the exterior aluminum channels.

3. Interior Application Installing netting on the inside is easier to manage during windy weather, though slightly less effective at cooling since light still passes through the glass first.

  • Insert twist-in plastic clips or eye bolts into the interior aluminum framing channels along the roof and eaves.
  • Thread high-tensile wire or heavy-duty twine through these clips to create a support grid just below the roof panels.
  • Lay the shade netting on top of the wire grid, or attach the netting directly to the clips to create a suspended canopy above your plants.