How to Stake Tall Delphiniums and Hollyhocks in Windy Gardens
Successfully growing towering delphiniums and hollyhocks in wind-prone gardens requires proactive staking techniques that absorb wind energy without snapping the fragile, hollow stems. This guide covers the exact methods needed to protect your blooms, including selecting heavy-duty materials, installing supports early in the spring, utilizing the figure-eight tying method for flexibility, and anchoring multi-stemmed plants with a perimeter cage system. By following these steps, you will ensure your vertical flowers remain upright and undamaged through summer storms and relentless gusts.
Choose the Right Staking Materials
Standard thin bamboo canes are often too weak for windy sites and can easily snap or uproot in wet soil. Instead, use materials that offer strength combined with a slight degree of flexibility to move with the wind.
- Stakes: Use thick, six-to-eight-foot bamboo canes (at least half an inch in diameter), vinyl-coated steel stakes, or rebar painted dark green or brown.
- Ties: Never use wire, fishing line, or thin nylon string, as these will act like a cheese wire and slice straight through hollow delphinium and hollyhock stems during a gale. Use soft gardening twine, strips of old cotton t-shirts, nylon stockings, or padded velcro plant ties.
Stake Early in the Season
The most common staking mistake is waiting until the plant is already tall and leaning. You must install your stakes in early spring when the plants are only 12 to 18 inches tall.
Staking early prevents you from piercing the expanding root crown with your stakes. Furthermore, it allows the foliage to grow around the supports, naturally hiding the stakes from view as the plant matures.
The Single-Stake Method for Hollyhocks
Hollyhocks generally grow one or two thick, heavy main stalks that act like sails in the wind. They require strong, individual support.
- Position the Stake: Place the stake on the windward side of the plant (the direction the prevailing wind blows from). This ensures the wind pushes the plant away from the stake, relying on the soft tie to catch it, rather than smashing the fragile stem directly against the hard stake.
- Drive it Deep: Hammer the stake at least 12 to 18 inches into the ground about two inches away from the base of the stem.
- Tie Incrementally: Tie the stem to the stake every 12 inches as it grows. Leave the very top of the flower spike untied so it can sway naturally, which prevents the top from snapping off at a rigid tie point.
The Perimeter Cage Method for Delphiniums
Because delphiniums throw up multiple hollow stems from a single crown, staking each stem individually is time-consuming and often looks messy. A perimeter cage (or corralling) method is much more effective in high winds.
- Place the Stakes: Drive three to five sturdy stakes into the ground evenly spaced around the perimeter of the delphinium clump. Keep the stakes about two inches outside the root ball.
- Create a Web: Starting about a foot off the ground, tie your soft twine securely to one stake. Loop the twine around the outside of the next stake, pulling it taut, until you have enclosed the plant in a circle of twine.
- Cross the Center: Weave the twine diagonally across the center of the circle, between the stems, and tie it off to the opposite stakes. This creates a supportive grid.
- Add Tiers: As the delphiniums shoot upward, add another layer of twine webbing every 12 to 15 inches. The stems will lean against this flexible net during high winds rather than snapping against a rigid post.
Master the Figure-Eight Tie
When tying individual stems—whether for a single hollyhock or a stray delphinium stalk—never tie the stem tightly against the stake. A rigid connection creates a fulcrum point where the wind will easily snap the stem.
Use the figure-eight loop:
- Wrap your twine firmly around the stake once or twice so it does not slide down.
- Cross the two ends of the twine in the space between the stake and the stem.
- Loop the ends loosely around the plant stem and tie a secure knot.
Viewed from above, the tie will look like the number eight. The crossed twine in the middle acts as a soft bumper, preventing the stem from rubbing against the stake while giving the plant an inch or two of slack to sway safely in the wind.
Ongoing Maintenance
Even the best staking job requires maintenance. Check your plants weekly during peak growth, as delphiniums and hollyhocks can grow several inches in just a few days during late spring. Add new ties before the tops become heavy with buds. After any major windstorm, inspect your ties to ensure they have not slipped down the stakes or pulled too tightly against the expanding stems.